East Tennessee Four Wheel Drive - ET4WD

1993 Jeep Wrangler Clutch Master Cylinder/Slave Cylinder External Swap

View previous topic View next topic Go down

1993 Jeep Wrangler Clutch Master Cylinder/Slave Cylinder External Swap

Post by whj812 on Mon Oct 07, 2013 10:47 am

Hello All,

Im new here and Im looking for some advice and local help on my Jeep.

I have a 93 Wrangler with the old internal style slave cylinder, and it appears that I have a bad hydraulic hose or slave cylinder. I have a new found love of the older YJ jeeps and want to get mine back up and going. Does anyone on here have any experience with these jeeps and performing this external Slave swap? Looking for advice and help..... thanks alot!

whj812

Posts: 3
Join date: 2013-10-07

View user profile

Back to top Go down

Sorry I have a TJ

Post by Admin on Mon Oct 07, 2013 2:27 pm

I just had   oswap out my clutch hose when it burst from a heat crack, but mince is a TJ. Good Luck. I'm sure soneone will reply.

Admin
Admin

Posts: 15
Join date: 2013-03-25

View user profile http://et4wd.forumotion.com

Back to top Go down

Re: 1993 Jeep Wrangler Clutch Master Cylinder/Slave Cylinder External Swap

Post by whj812 on Tue Oct 08, 2013 2:14 pm

I hope thats all I have to do.

The problem is the 93 Model had a year specific part for the hose connecting the master cylinder to the slave cylinder. I spoke to a guy this morning who thinks that the old line can be repaired or I can have another hydraulic line made for it custom.

whj812

Posts: 3
Join date: 2013-10-07

View user profile

Back to top Go down

Re: 1993 Jeep Wrangler Clutch Master Cylinder/Slave Cylinder External Swap

Post by majic2001 on Tue Oct 08, 2013 2:47 pm

Get some a/n fittings in it and go braided stainless, it's well worth it

majic2001

Posts: 71
Join date: 2013-03-25
Age: 39
Location: Kodak, TN

View user profile http://www.qwtech.com

Back to top Go down

Re: 1993 Jeep Wrangler Clutch Master Cylinder/Slave Cylinder External Swap

Post by whj812 on Tue Oct 08, 2013 2:48 pm

How would the a/n fittings fit to the stock "quick release" style slave?

whj812

Posts: 3
Join date: 2013-10-07

View user profile

Back to top Go down

Re: 1993 Jeep Wrangler Clutch Master Cylinder/Slave Cylinder External Swap

Post by majic2001 on Tue Oct 08, 2013 2:55 pm

There's a fitting that converts it. I just did the same with quick discos on my TJ , ordered from Summit

majic2001

Posts: 71
Join date: 2013-03-25
Age: 39
Location: Kodak, TN

View user profile http://www.qwtech.com

Back to top Go down

Re: 1993 Jeep Wrangler Clutch Master Cylinder/Slave Cylinder External Swap

Post by BCarter on Fri Oct 11, 2013 9:37 pm

Switching over to AN fittings makes everything easier. Jegs, Summit or any race shop carries AN braided lines.

BCarter

Posts: 14
Join date: 2013-06-03

View user profile

Back to top Go down

Re: 1993 Jeep Wrangler Clutch Master Cylinder/Slave Cylinder External Swap

Post by BCarter on Fri Oct 11, 2013 9:40 pm

Is it possible to switch out bellhousings to one that has a external slave cylinder?

BCarter

Posts: 14
Join date: 2013-06-03

View user profile

Back to top Go down

View previous topic View next topic Back to top


Permissions in this forum:
You cannot reply to topics in this forum